SOLAR PHOTOVOLTAIC MODULES PM40
Solar Photovoltaic Modules, type PM40 are manufactured using Mono Crystalline Silicon Solar Cells. These are high quality and high performance modules suitable for power generation. These modules have excellent durability to withstand extreme temperature and weather conditions of the high altitudes, deserts and coastal regions.
FEATURES
- Uses mono crystalline silicon Solar Cells.
- Suitable for DC 12V systems or multiple there-of.
- Encapsulation of cells using UV stabilized polymer (EVA) and protective back cover using Tedler-Polyester-Tedlar.
- High transmission toughened glass superstrate and anodized aluminum frame for mounting.
- Long service Life.
APPLICATIONS
- Lighting
- Television
- Water Pumping
- Rural Electrification
- Power Plants
- Telecommunication
- Refrigeration
- Railway Signalling
- Remote Resort Power
SOLAR MODULE PM 40
SPECIFICATION:
| Electrical Parameters |
PM 40 |
Maximum Power Rating Pmax. (Wp)* |
40.0 |
Minimum Power Rating Pmin (Wp)* |
38.0 |
Rated Current IMPP (A) |
2.35 |
Rated Voltage VMPP (V) |
17.0 |
Short circuit current Isc (A) |
2.65 |
Open circuit Voltage Voc (V) |
21.4 |
Physical Parameters
| No.of Cells |
(Nos) |
36 |
Physical Dimension (mm) |
(L x W x T) |
645 x 550 x 40 |
Weight |
(Kg) |
4.2 |
Environmental Rating
| NOCT ** |
(°C) |
45 ±2 |
Maximum permitted module temperature |
(°C) |
-40 to + 85 |
Maximum permissible system voltage |
(V) |
600 |
Relative Humidity at 85°C |
(%) |
85 |
* Under Standard Test Conditions (STC):
Air Mass : AM 1.5 Irradiance : 1000 W/m2 |
Cell Temperature : 25°C |
** Nominal Operating Cell Temperature (NOCT) at :
Wind Speed : 1m/s Irradiance : 800 W/m2 |
Ambient Temperature : 20°C |
|
